AVPRO EDGE, Switchers
AVPRO EDGE, Switchers
SET OUT%o EXAUD LEV%v
SET OUT%o VS IN%n
SET OUT1 VS IN1
SET OUT1 VS IN2
SET OUT1 VS IN3
SET OUT1 VS IN4
SET OUT%o VS IN%n
SET OUT%o AS IN%n
SET OUT%o VS IN%n
The AC-MX-44 is a 4x4 HDMI matrix switch that supports HDMI 2.0(a/b), HDCP 2.3, up to 4K video resolution, and up to 18Gbps bandwidth. This switch allows any source to show on any connected displays.
Resolution: Up to 4k 60HZ 4:4:4
Frame Rate: 60Hz
Signal Type: HDMI 2.0(a/b), HDCP 2.3, HDR10, HDR10+, Dolby Vision, HLG
Inputs: 4 HDMI
Outputs: 4 HDMI
First Use: Connect ground strap, HDMI sources to inputs, HDMI displays to outputs, LAN cable to RJ45 port, power on sources, power on displays, connect 12V power supply.
Video Optimization: Built-in scalers on each output (4K to 1080P, 4:4:4 to 4:2:0). Advanced EDID management.
Control: LAN, RS232, IR.
Tech Support Phone: 877-886-5112
Tech Support Email: info@avproglobal.com, support@avproedge.com
Factory Reset: Yes (via WebUI System section)
Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.