THE HUB

The Hub/BENQ/Projectors/LU895UST

BENQ, Projectors

LU895UST

Get JSON Get CSV Report a problem Add a driver Start a new driver from this one
Control
RS-232, IP (default RS-232)
Encoding
ASCII
IP
TCP port 8000
RS-232
115200 baud, 8N1
Line ending
CR
More from this makerBenQ Projector v1BenQ Projector v2BenQ Projector v3

Commands

23 commands
POWER2
POWER ON *pow=on#
Ending: cr
POWER OFF *pow=off#
Ending: cr
VOLUME2
VOLUME UP *vol=+#
Ending: cr
VOLUME DOWN *vol=-#
Ending: cr
MUTE2
MUTE ON *mute=on#
Ending: cr
MUTE OFF *mute=off#
Ending: cr
INPUT10
INPUT 1 *sour=hdconnect#
Ending: cr
INPUT 2 *sour=RGB2#
Ending: cr
HDMI 1 *sour=hdmi#
Ending: cr
HDMI 2 *sour=hdmi2#
Ending: cr
DISPLAY PORT *sour=dp#
Ending: cr
HDBASET *sour=hdbaset#
Ending: cr
AVoIP *sour=network#
Ending: cr
USB *sour=usbdisplay#
Ending: cr
VIDEO MUTE ON *blank=on#
Ending: cr
VIDEO MUTE OFF *blank=off#
Ending: cr
MENU7
UP *up#
Ending: cr
DOWN *down#
Ending: cr
LEFT *left#
Ending: cr
RIGHT *right#
Ending: cr
ENTER *enter#
Ending: cr
EXIT *menu=off#
Ending: cr
MENU *menu=on#
Ending: cr

Cheat sheet

driver.cheatSheet()

What it is

The BenQ LU895UST is a 5000 lumens WUXGA laser simulation projector designed for immersive projection in space-limited environments. It features an ultra-short throw ratio and is built for fast deployment and consistent setup.

Specs

Resolution: WUXGA (1920 x 1200)

Lens

Throw Distance

Mounting: Ceiling mount CMG3 (5J.JAM10.001)

Setup

Video Optimization: Blending Ready Mode and factory WBA for multi-projector alignment.

PJLink

Support

Tech Support Phone: 888-512-2367

About this driver

driver.source()

Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.

Revision
2
Updated
2026-11-11
Catalog date
2026-11-12
License
CC-BY-4.0