VIEWSONIC, Projectors
VIEWSONIC, Projectors
06 14 00 04 00 34 11 00 00 5D
06 14 00 04 00 34 11 01 00 5E
06 14 00 04 00 34 14 01 00 61
06 14 00 04 00 34 14 02 00 62
06 14 00 04 00 34 14 00 01 61
06 14 00 04 00 34 14 00 00 60
06 14 00 04 00 34 13 01 05 65
06 14 00 04 00 34 13 01 06 66
06 14 00 04 00 34 13 01 03 63
06 14 00 04 00 34 12 09 01 68
06 14 00 04 00 34 12 09 00 67
02 14 00 04 00 34 02 04 0B 5D
02 14 00 04 00 34 02 04 0C 5E
02 14 00 04 00 34 02 04 0D 5F
02 14 00 04 00 34 02 04 0E 60
02 14 00 04 00 34 02 04 15 67
02 14 00 04 00 34 02 04 13 65
02 14 00 04 00 34 02 04 0F 61
The ViewSonic PJD5255 is a 3,300 ANSI Lumens XGA DLP Projector designed for various projection needs. The ViewSonic PJD5255 is a DLP projector.
Resolution: 1024 x 768 XGA
Lens
Throw Distance
Inputs: HDMI (1), VGA (2), S-Video (1), Composite (1), Audio-in (1), Mini USB (1)
First Use: Install a new lamp. Select OSD language.
Video Optimization: Press Auto Sync on remote for Frequency/Clock adjustment. Set Lamp Mode to Economic. Adjust lens focus, projection angle, and height.
CEC: Enable in SOURCE > Auto Power On > CEC menu.
Control: Remote within 8m (26 ft). Set remote code 1-8 in SYSTEM SETTING: ADVANCED > Remote Control Code. To switch code, press ID set and number for 5+ seconds.
PJLink
Tech Support Phone: Australia: 1800 880 818; Canada (Toll-Free): 1-866-463-4775; United States (Toll-Free): 1-800-688-6688; Latin America (Mexico): (55) 6547-6454
Tech Support Email: United States: service.us@viewsonic.com; Canada: service.ca@viewsonic.com; Australia: service@au.viewsonic.com
Power Cycle: Press Power button twice to shut down, then disconnect power cord.
Factory Reset: Go to SYSTEM SETTING: ADVANCED > Reset Settings and select Reset.
Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.