WYRESTORM, Switchers
WYRESTORM, Switchers
SET CEC_PWR hdmiout%o on
SET CEC_PWR hdmiout%o off
SET MUTE audioout%o on
SET MUTE audioout%o off
SET SW hdmiin%n hdmiout%o
SET SW hdmiin1 hdmiout1
SET SW hdmiin2 hdmiout1
SET SW hdmiin3 hdmiout1
SET SW hdmiin4 hdmiout1
SET SW hdmiin%n hdmiout%o
SET SW hdmiin%n hdmiout%o
The WyreStorm MX-0404-HDMI is a 4K HDR 4-input matrix switcher with four scaling HDMI outputs. It routes HDMI sources independently to four displays and supports RS-232 and network control.
Resolution: 4096x2160p @60Hz 8bit 4:4:4
Frame Rate
Signal Type: DCI, RGB, HDR, HDR10, Dolby Vision up to 30Hz, HLG, BT.2020, BT.2100
Inputs: 4x HDMI In: 19-pin type A
Outputs: 4x HDMI Out: 19-pin type A, 1x IR Extension, 4x S/PDIF Coaxial
First Use: Connect HDMI sources to inputs 1-4 and displays to HDMI outputs 1-4 before applying power.
CEC: The matrix can automatically send CEC Power On/Off commands to an output based on HDMI input signal detection.
Control: Press and hold UP and DOWN buttons for 3 seconds to display the IP address. Default installer and general passwords are the same; changing the installer password is recommended.
Tech Support Phone: UK: +44 (0) 1793 230 343, ROW: 844.280.WYRE (9973)
Tech Support Email: http://wyrestorm.com/contact-tech-support
Factory Reset: RESET
Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.