EXTRON, Switchers
EXTRON, Switchers
\x1BO%o*"PwrOn"DCEC,DcecO%o*%E0%04*1
\x1BO%o*"PwrOff"DCEC,DcecO%o*%E0%36*1
%o+V
%o-V
%o*%vV
%o*1Z
%o*0Z
%o*1B
%o*0B
1
2
3
4
1
2
3
4
*
1*1!
2*1!
3*1!
4*1!
%n*%o!
%n*%o%
%n*%o$
The DXP HD 4K PLUS Series are digital matrix switchers that route HDMI signals from multiple sources to HDMI-equipped display devices. They support computer and video resolutions up to 4K @ 60 Hz.
Resolution: up to 4K @ 60 Hz
Frame Rate
Signal Type: HDMI 2.0b, HDR Deep Color up to 12-bit, 3D, HD lossless audio
Inputs: 4
Outputs: 4
First Use: Power off all connected devices. Connect HDMI input devices. Connect HDMI output devices. Connect control devices (RS-232 or LAN). Connect switcher to AC power. Power on connected devices. Download and run Product Configuration Software (PCS). Use PCS to select EDID files, create ties, and set presets.
Control: Front panel buttons, RS-232, USB Config port, LAN (Ethernet), Built-in web page, Product Configuration Software (PCS)
Power Cycle: Power cycle to cancel power save mode.
Factory Reset: Firmware: Hold Reset while powering up. IP Settings: Hold Reset until LED blinks twice, release, then press momentarily. Absolute: Hold Reset until LED blinks three times, release, then press momentarily.
Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.