EXTRON, Switchers
EXTRON, Switchers
\x1BO%o*"PwrOn"DCEC,DcecO%o*%E0%04*1
\x1BO%o*"PwrOff"DCEC,DcecO%o*%E0%36*1
%o+V
%o-V
%o*%vV
%o*1Z
%o*0Z
%o*1B
%o*0B
1
2
3
4
1
2
3
4
*
1*1!
2*1!
3*1!
4*1!
%n*%o!
%n*%o%
%n*%o$
The DXP HD 4K PLUS Series and DXP DVI Pro/HDMI series are digital matrix switchers that route HDMI or DVI-D signals from multiple sources to display devices. They support resolutions up to 4K @ 60 Hz and are HDCP-compliant.
Resolution: up to 4K @ 60 Hz
Frame Rate: 60 Hz
Signal Type: HDMI 2.0b, HDR Deep Color up to 12-bit, 3D, HD lossless audio
Inputs: 8 HDMI
Outputs: 8 HDMI
First Use: Turn off power to all connected devices. Connect HDMI input and output devices. Connect control devices (RS-232, USB Config, LAN). Plug switcher into AC source. Turn on power to input/output devices. Select EDID files using the control software or web interface.
Control: RS-232: Use the front panel Config port (9600 baud, 8N1) or rear panel Remote port (configurable). LAN: Default IP 192.168.254.254. Control via web pages or PCS software.
Tech Support Phone: USA: (714) 491-1500, +800.633.9876, +1.714.491.1500, +1.919.863.1794; Europe: +31.33.453.4040, +800.3987.6673; Asia: +65.6383.4400, +800.7339.8766; Japan: +81.3.3511.7655; China: +4000.EXTRON, +4000.398766, +86.21.3760.1568; Middle East: +971.4.2991800; India: 1800.3070.3777, +91-80 3055.3777; Korea: +82.2.3444.1571
Power Cycle: Remove all power cords from the equipment.
Factory Reset: Mode 1 (Firmware): Hold Reset button while powering up. Mode 5 (Absolute): While running, hold Reset for 9 seconds, release, then press momentarily. Resets IP to 192.168.254.254, subnet to 255.255.0.0.
Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.