IPMX, End Points
IPMX, End Points
PATCH /x-nmos/connection/v1.2/single/receivers/%o/staged|{"sender_id":"%n","master_enable":true,"activation":{"mode":"activate_immediate"}}
PATCH /x-nmos/connection/v1.2/single/receivers/%o/staged|{"sender_id":"%n","master_enable":true,"activation":{"mode":"activate_immediate"}}
GET /x-nmos/node/v1.3/senders
GET /x-nmos/node/v1.3/receivers
GET /x-nmos/node/v1.3/self
GET /x-nmos/connection/v1.2/single/senders/%n/transportfile
GET /x-nmos/connection/v1.2/single/receivers/%o/active
GET /x-nmos/connection/v1.2/single/receivers/%o/constraints
PATCH /x-nmos/connection/v1.2/single/receivers/%o/staged|{"transport_file":{"type":"application/sdp","data":"%v"},"master_enable":true,"activation":{"mode":"activate_immediate"}}
PATCH /x-nmos/connection/v1.2/single/receivers/%o/staged|{"sender_id":null,"master_enable":false,"activation":{"mode":"activate_immediate"}}
POST /x-nmos/connection/v1.2/bulk/receivers|%v
PUT /x-nmos/node/v1.3/receivers/%o/target|%v
Generic driver for any IPMX or AMWA NMOS decoder, from any manufacturer in the IPMX alliance. It uses NMOS IS-04 to enumerate the device's receivers and IS-05 to subscribe one to an encoder's sender, which works with or without an NMOS registry or routing controller.
Resolution: Up to 3840x2160 at 60Hz
Type: IPMX / NMOS AV-over-IP decoder
Inputs: Network only; outputs vary by manufacturer and model
Mounting: Refer to the specific model
First Use: Put the device on the same subnet as the controller and confirm it answers on the NMOS Node API. Discovery browses for _nmos-node._tcp over mDNS; where mDNS is blocked between VLANs, add the device by IP instead. Read the supported API versions from GET /x-nmos/node/ and GET /x-nmos/connection/ before issuing routing commands.
CEC: Not part of IPMX. Control displays over their own driver.
Switch: A switch points a receiver at a sender. Send ROUTE VIDEO with %o set to the local receiver UUID and %n set to the remote sender UUID, then confirm with GET ROUTE. Send ROUTE AUDIO the same way against the audio receiver so audio follows video. Devices that publish no resolvable sender id use ROUTE SDP with the text from GET SENDER SDP.
Power Cycle: Refer to the manufacturer of the specific device.
Factory Reset: Refer to the manufacturer of the specific device.
Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.