IPMX, End Points
IPMX, End Points
PATCH /x-nmos/connection/v1.2/single/receivers/%o/staged|{"sender_id":"%n","master_enable":true,"activation":{"mode":"activate_immediate"}}
PATCH /x-nmos/connection/v1.2/single/receivers/%o/staged|{"sender_id":"%n","master_enable":true,"activation":{"mode":"activate_immediate"}}
GET /x-nmos/node/v1.3/senders
GET /x-nmos/node/v1.3/receivers
GET /x-nmos/node/v1.3/self
GET /x-nmos/connection/v1.2/single/senders/%n/transportfile
GET /x-nmos/connection/v1.2/single/receivers/%o/active
GET /x-nmos/connection/v1.2/single/receivers/%o/constraints
PATCH /x-nmos/connection/v1.2/single/receivers/%o/staged|{"transport_file":{"type":"application/sdp","data":"%v"},"master_enable":true,"activation":{"mode":"activate_immediate"}}
PATCH /x-nmos/connection/v1.2/single/receivers/%o/staged|{"sender_id":null,"master_enable":false,"activation":{"mode":"activate_immediate"}}
POST /x-nmos/connection/v1.2/bulk/receivers|%v
PUT /x-nmos/node/v1.3/receivers/%o/target|%v
Generic driver for any IPMX or AMWA NMOS encoder, from any manufacturer in the IPMX alliance. It uses NMOS IS-04 to enumerate the device's senders and IS-05 to route them onto a decoder, which works with or without an NMOS registry or routing controller.
Resolution: Up to 3840x2160 at 60Hz
Type: IPMX / NMOS AV-over-IP encoder
Inputs: Varies by manufacturer and model
Mounting: Refer to the specific model
First Use: Put the device on the same subnet as the controller and confirm it answers on the NMOS Node API. Discovery browses for _nmos-node._tcp over mDNS; where mDNS is blocked between VLANs, add the device by IP instead. Read the supported API versions from GET /x-nmos/node/ and GET /x-nmos/connection/ before issuing routing commands.
CEC: Not part of IPMX. Control displays over their own driver.
Switch: An encoder is a source. Use LIST SENDERS to read its sender UUIDs and GET SENDER SDP for the stream description, then route those senders from the decoder that should display them. A multi-channel encoder lists one sender per channel on one address; route them separately.
Power Cycle: Refer to the manufacturer of the specific device.
Factory Reset: Refer to the manufacturer of the specific device.
Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.