KRAMER, Switchers
KRAMER, Switchers
#AUD-LVL 1,%o,++
#AUD-LVL 1,%o,--
#AUD-LVL 1,%o,%v
#MUTE %o,1
#MUTE %o,0
#VMUTE %o,1
#VMUTE %o,0
#VID 1>%o
#VID 2>%o
#VID 3>%o
#VID 4>%o
#VID %n>%o
#VID 1>1
#VID 2>1
#VID 3>1
#VID 4>1
#VID %n>%o
#VID %n>%o
The Kramer VS-44H2A is a high-performance 4x4 matrix switcher for 18G 4K@60Hz (4:4:4) HDR HDMI signals. It reclocks and equalizes the signals and can route any one of four HDMI, HDCP-compliant sources (selectable) to any or all outputs simultaneously.
Resolution: 4K@60Hz 4:4:4
Frame Rate
Signal Type: HDMI 2.0 with HDCP 2.2/1.4; HDR10, xvYCC, Dolby TrueHD/DTS-HD MA, 3D
Inputs: 4 HDMI
Outputs: 4 HDMI, 4 S/PDIF, 4 Balanced Stereo Audio
First Use: Unpack, review manual, check for firmware upgrades.
Video Optimization: Use quality cables, avoid tight bundles, electrical interference, moisture, direct sunlight, and dust.
Control: Front panel, RS-232, IR remote, web interface.
Tech Support Email: info@KramerAV.com
Power Cycle: Disconnect the power and unplug the unit from the wall before installing.
Factory Reset: Protocol 3000: "#factory" command. Web Pages: Device Settings page, Soft Factory Reset resets all parameters to factory default except for network parameters.
Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.