KRAMER, Switchers
KRAMER, Switchers
#VOLUME %o,++
#VOLUME %o,--
#VOLUME %o,%v
#MUTE %o,1
#MUTE %o,0
#VMUTE %o,1
#VMUTE %o,0
#VID 1>%o
#VID 2>%o
#VID 3>%o
#VID 4>%o
#VID %n>%o
#VID 1>1
#VID 2>1
#VID 3>1
#VID 4>1
#VID %n>%o
#AUD %n>%o
#VID %n>%o
The Kramer VS-88H2A is an 8x8 4K60 HDMI matrix with audio breakaway routing, designed for high-quality matrix switching of HDMI inputs to HDMI outputs. It also features an integrated audio matrix for independent and flexible audio and ARC extraction, insertion, and routing.
Resolution: 4K@60Hz (4:4:4)
Frame Rate
Signal Type: HDMI
Inputs: 8 HDMI, 8 Stereo Analog Audio (3.5mm)
Outputs: 8 HDMI, 8 Stereo Balanced Audio (5-pin terminal)
First Use: Power on; initialization takes 10 seconds.
Video Optimization: EDID management per input (capture from display or use custom files).
Control: Remote IP, browser, local panel, presets, firmware upgrade, test patterns, API commands.
Tech Support Email: info@kramerav.com
Power Cycle: Disconnect power and unplug from wall before installation.
Factory Reset: Front panel: Power off, hold LOCK, EDID, STO for 3 seconds while powering on. Protocol 3000: Use "#factory" command. Web Pages: Device Settings > Reset.
Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.