MATROX, End Points
MATROX, End Points
GET /api/context/settings/modules/startables
GET /api/context/settings/modules/startables/%o
PUT /api/context/settings/modules/startables/%o/start|{}
PUT /api/context/settings/modules/startables/%o/stop|{}
GET /api/context/settings/modules
PUT /api/context/dynamicsettings/output/%o/volume|{"Volume":%v}
GET /api/context
RMW /api/context/settings|/api/context::Context/Settings::Pipeline/Modules[__type~=Streamer]/Settings/MulticastAddress=%v
GET /api/context
GET /api/context/settings/default
GET /api/command/syslog/server
POST /api/command/reboot|{}
PUT /api/context/dynamicsettings/input/%o/gain|{"Gain":%v}
PUT /api/context/dynamicsettings/input/%o/mute|{"Mute":true}
PUT /api/context/dynamicsettings/input/%o/mute|{"Mute":false}
PUT /api/context/dynamicsettings/output/%o/mute|{"Mute":true}
PUT /api/context/dynamicsettings/output/%o/mute|{"Mute":false}
The Matrox Maevex encoders capture and stream up to 4K video over IP, with a flexible processing pipeline whose streamer and recorder modules can be started and stopped independently. They stream RTSP, MPEG-2 TS and SRT, and expose per-port analog audio gain, volume and mute.
Resolution: Up to 4096x2160
Type: AV-over-IP streaming encoder
Inputs: Refer to the specific model
Mounting: Standalone appliance or PCIe card
First Use: Set the first administrator password before the API will accept requests. Every call then carries HTTP BASIC credentials over HTTPS, and the device presents a self-signed certificate that the controller has to trust explicitly.
CEC: Not supported.
Switch: This is an encoder, so there is nothing to route on it. Send LIST STREAMS to read each streamer module's GUID and state, then START STREAM or STOP STREAM with %o set to that GUID. Routing happens at the other end: STREAM ADDRESS returns the context, whose Info/StreamsInformation carries the full stream URL each streamer is publishing and whose Settings/Pipeline/Modules carries the multicast group itself. That value is what a decoder's SET INPUT takes. SET STREAM ADDRESS changes the group the encoder sends to, which is commissioning rather than routing.
Tech Support Phone: 1-800-361-4903
Tech Support Email: video@matrox.com
Power Cycle: Send RESTART DEVICE, or disconnect power for ten seconds.
Factory Reset: Refer to the Maevex 6100 Series user guide.
Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.