MATROX, End Points
MATROX, End Points
PATCH /x-nmos/connection/v1.2/single/receivers/%o/staged|{"sender_id":"%n","master_enable":true,"activation":{"mode":"activate_immediate"}}
PATCH /x-nmos/connection/v1.2/single/receivers/%o/staged|{"sender_id":"%n","master_enable":true,"activation":{"mode":"activate_immediate"}}
GET /x-nmos/node/v1.3/senders
GET /x-nmos/node/v1.3/receivers
GET /x-nmos/node/v1.3/self
GET /x-nmos/connection/v1.2/single/senders/%n/transportfile
GET /x-nmos/connection/v1.2/single/receivers/%o/active
GET /x-nmos/connection/v1.2/single/receivers/%o/constraints
PATCH /x-nmos/connection/v1.2/single/receivers/%o/staged|{"transport_file":{"type":"application/sdp","data":"%v"},"master_enable":true,"activation":{"mode":"activate_immediate"}}
PATCH /x-nmos/connection/v1.2/single/receivers/%o/staged|{"sender_id":null,"master_enable":false,"activation":{"mode":"activate_immediate"}}
POST /x-nmos/connection/v1.2/bulk/receivers|%v
PUT /x-nmos/node/v1.3/receivers/%o/target|%v
The Matrox Maevex MGX D1 decoder renders low-latency AV-over-IP streams with H.265 4:4:4 image quality. It decodes one 4K60 channel, or two at 1080p60, to two HDMI outputs, with multiview compositing and support for open IPMX alongside Matrox IQ Mode.
Resolution: Up to 3840x2160 at 60Hz
Size: 199mm L x 152mm W x 30mm H
Type: IPMX-ready H.265/H.264 AV-over-IP decoder
Inputs: Network only; 2x HDMI outputs
Mounting: Standalone or 1U half-rack with the RMK-19TR-A kit
First Use: Connect LAN 1 and power on. The device takes a DHCP address by default and advertises itself over mDNS. Configure it through the web interface or Matrox Central Manager, then confirm it answers on the NMOS Node API before routing.
CEC: Not documented for this device.
Switch: Send ROUTE VIDEO with %o set to this decoder's receiver UUID and %n set to the encoder's sender UUID, then confirm with GET ROUTE. Send ROUTE AUDIO against the audio receiver so audio follows video.
Tech Support Phone: 1-800-361-4903
Tech Support Email: video@matrox.com
Power Cycle: Disconnect the external power supply, wait ten seconds, reconnect.
Factory Reset: Refer to the Maevex MGX user guide.
Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.