THE HUB

The Hub/GLOBAL CACHE/End Points/iTach IP2SL

GLOBAL CACHE, End Points

iTach IP2SL

Get JSON Get CSV Report a problem Add a driver Start a new driver from this one
Control
IP
Encoding
ASCII
IP
TCP port 4998
Line ending
CR
Roles
End point
Discovery
GLOBALCACHE
More from this makerFlex IR 2 Emitter 1 BlasterFlex IR 3 EmitterFlex IR BlasterFlex IR EmitterFlex Relay SensorFlex Serial RS232Flex Serial RS485GC-100-06GC-100-12Global Connect IRGlobal Connect RelayGlobal Connect SerialiTach IP2CCiTach IP2IRiTach WF2CCiTach WF2IRiTach WF2SLMost Models

Commands

5 commands
OTHER5
GET DEVICE MODE getdevices
Reply: device,0,0 ETHERNETdevice,1,1 SERIALendlistdevicesVariables: One line per module, each ending CR, then endlistdevices.Ending: cr
GET SERIAL CONFIG get_SERIAL,1:1
Reply: SERIAL,1:1,%b,FLOW_%c,PARITY_%eVariables: %b = 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200 %c = NONE, HARDWARE %e = NO, EVEN, ODDEnding: cr
SET SERIAL CONFIG set_SERIAL,1:1,%g,FLOW_%h,PARITY_%i
Reply: SERIAL,1:1,%g,FLOW_%h,PARITY_%iVariables: %g = 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200 %h = NONE, HARDWARE %i = NO, EVEN, ODDEnding: cr
GET FIRMWARE VERSION getversion
Reply: %vVariables: %v = firmware part number and version, for example 710-3000-21Ending: cr
GET NETWORK get_NET,0:1
Reply: NET,0:1,%a,%b,%c,%d,%eVariables: %a = UNLOCKED, LOCKED %b = DHCP, STATIC %c = IP address %d = subnet mask %e = gatewayEnding: cr

Cheat sheet

driver.cheatSheet()

What it is

The Global Cache iTach IP2SL puts one RS-232 port on the network over Ethernet. Serial data crosses TCP port 4999 unchanged, and the port's settings are read and set on the Unified TCP API port 4998.

Specs

Type: RS-232 to Ethernet adapter

Inputs: 1x DB9 RS-232

Mounting: Desktop

Setup

First Use: With no DHCP server the unit takes 192.168.1.70. Serial data crosses TCP 4999, up to 4 clients only with Serial Multiconnection Mode enabled on the web page. Up to 8 clients on port 4998.

Support

Tech Support Phone: 541-899-4800

Power Cycle: Remove power for ten seconds. Relay states return to open after a reset or power cycle.

About this driver

driver.source()

Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.

Revision
1
Updated
2026-11-05
Catalog date
2026-11-12
License
CC-BY-4.0