THE HUB

The Hub/GLOBAL CACHE/End Points/Most Models

GLOBAL CACHE, End Points

Most Models

Get JSON Get CSV Report a problem Add a driver Start a new driver from this one
Control
IP
Encoding
ASCII
IP
TCP port 4998
Line ending
CR
More from this makerFlex IR 2 Emitter 1 BlasterFlex IR 3 EmitterFlex IR BlasterFlex IR EmitterFlex Relay SensorFlex Serial RS232Flex Serial RS485GC-100-06GC-100-12Global Connect IRGlobal Connect RelayGlobal Connect SerialiTach IP2CCiTach IP2IRiTach IP2SLiTach WF2CCiTach WF2IRiTach WF2SL

Commands

26 commands
OTHER26
GET DEVICE MODE getdevices
Reply: device,0,0 ETHERNETdevice,1,1 %aendlistdevicesVariables: %a = SERIAL, IR, IRTRIPORT, IRTRIPORT_BLASTER, RELAYSENSOREnding: cr
SET MODE SERIAL set_IR,1:1,SERIAL
Reply: IR,1:1,SERIALEnding: cr
SET MODE IR SINGLE set_IR,1:1,IR
Reply: IR,1:1,IREnding: cr
SET MODE IR TRIPORT set_IR,1:1,IRTRIPORT
Reply: IR,1:1,IRTRIPORTEnding: cr
SET MODE IR BLASTER set_IR,1:1,IRTRIPORT_BLASTER
Reply: IR,1:1,IRTRIPORT_BLASTEREnding: cr
SET MODE RELAY SENSOR set_RELAYSENSOR,1:1
Reply: RELAYSENSOR,1:1Ending: cr
GET RELAY STATE 1 getstate,1:1
Reply: state,1:1,0Ending: cr
GET RELAY STATE 2 getstate,1:2
Reply: state,1:1,1Ending: cr
GET RELAY STATE 3 getstate,1:3
Reply: state,1:1,2Ending: cr
GET RELAY STATE 4 getstate,1:4
Reply: state,1:1,3Ending: cr
GET SENSOR STATE 1 getstate,2:1
Reply: state,2:1,1Ending: cr
GET SENSOR STATE 2 getstate,2:2
Reply: state,2:1,2Ending: cr
GET SENSOR STATE 3 getstate,2:3
Reply: state,2:1,3Ending: cr
GET SENSOR STATE 4 getstate,2:4
Reply: state,2:1,4Ending: cr
OPEN RELAY 1 setstate,1:1,0
Reply: state,1:1,0Ending: cr
OPEN RELAY 2 setstate,1:2,0
Reply: state,1:2,0Ending: cr
OPEN RELAY 3 setstate,1:3,0
Reply: state,1:3,0Ending: cr
OPEN RELAY 4 setstate,1:4,0
Reply: state,1:4,0Ending: cr
CLOSE RELAY 1 setstate,1:1,1
Reply: state,1:1,1Ending: cr
CLOSE RELAY 2 setstate,1:2,1
Reply: state,1:2,1Ending: cr
CLOSE RELAY 3 setstate,1:3,1
Reply: state,1:3,1Ending: cr
CLOSE RELAY 4 setstate,1:4,1
Reply: state,1:4,1Ending: cr
GET SERIAL CONFIG get_SERIAL,1:1
Reply: SERIAL,1:1,%b,FLOW_%c,PARITY_%e,STOPBITS_%fVariables: %b = 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200 %c = NONE, HARDWARE %e = NO, EVEN, ODD %f = 1, 2Ending: cr
SET SERIAL CONFIG set_SERIAL,1:1,%g,FLOW_%h,PARITY_%i,STOPBITS_%j
Reply: SERIAL,1:1,%g,FLOW_%h,PARITY_%i,STOPBITS_%jVariables: %g = 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200 %h = NONE, HARDWARE %i = NO, EVEN, ODD %j = 1, 2Ending: cr
SEND IR SINGLE EMMITER sendir,1:1,1,%j,1,%k,%l
Reply: completeir,1:1,1Variables: %j = <freq> %k = <offset> %l = <Commands>Ending: cr
SEND IR TRI EMMITER sendir,1:%m,1,%j,1,%k,%l
Reply: completeir,1:1,1Variables: %m = 1,2,3 %j = <freq> %k = <offset> %l = <Commands>Ending: cr

About this driver

driver.source()

Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it.

Revision
2
Updated
2026-11-11
Catalog date
2026-11-12
License
CC-BY-4.0